NEWS

Pay attention to industry development and create value through services

The necessity of three temperature testing in the mass production of optical modules
2026-11-18 11:14:47

At present, with the large-scale implementation of 800G and accelerated mass production of 1.6T, high-speed optical modules have officially entered the era of large-scale delivery and full scene deployment. The three temperature test determines whether the high-speed optical module can be integrated into the AI computing power cluster, whether it can operate stably for 7 × 24 hours for a long time, and whether it can avoid large-scale after-sales failures.
The three temperature test of the optical module simulates the real working temperature environment of the entire life cycle of the optical module, and conducts a complete set of photoelectric performance tests at three key temperature nodes: -40 ℃ low temperature; +25 ℃ at room temperature; +High temperature of 85 ℃. At three temperature nodes, the device will continuously detect core parameters such as the transmission power, reception sensitivity, extinction ratio, center wavelength drift, eye diagram quality, and bit error rate of the optical module to verify the stability of the module's performance under temperature changes.
Why is it necessary for high-speed optical modules to undergo a three temperature test?
High speed modules are extremely sensitive to temperature, and even small temperature changes can cause malfunctions. The DSP chip, laser, optical lens, and packaging material of the high-speed optical module have extremely low fault tolerance for temperature changes. Industry test data shows that a temperature fluctuation of only 1 ℃ may cause wavelength shift and optical power jitter, directly leading to link errors, data loss, and computing power transmission lag. Room temperature testing cannot completely conceal these hidden dangers, only high and low temperature limit testing can force potential performance defects.
The density of AI computing power cluster cabinets is extremely high, GPU、 When the switch is running at full load, the local temperature will quickly rise and remain in a high-temperature baking state for a long time. Modules that have not undergone high-temperature verification at 85 ℃ are prone to experiencing high temperature optical power attenuation, decreased receiving sensitivity, skyrocketing bit errors, accelerated aging during long-term operation, and significantly shortened lifespan after being installed.
In addition to data centers, a large number of optical modules are used in 5G base stations, backbone transmission, and edge computing devices. Winter low temperatures and drastic temperature differences between day and night are the norm. In low-temperature environments, modules are prone to startup abnormalities, link jitter, and parameter drift exceeding the standard. Products that have not undergone low-temperature testing are prone to batch on-site failures.
High speed optical modules are often shipped in batches of tens or hundreds of thousands. Packaging process deviations, material batch differences, welding stress issues, all hidden at room temperature, and concentrated outbreaks in temperature changing environments. The three temperature test is the "screening threshold" for mass production, which eliminates hidden defective products in advance and eliminates the risk of batch after-sales collapse and brand reputation damage.

The Temperature Forcing Systems TS560 developed and produced by ZONGLEN relies on directional cold and hot air flow to directly apply temperature environment to the optical module DUT, completing low-temperature, room temperature, and high-temperature three temperature working condition verification, and adapting to high-speed optical modules (100G-1.6T) such as SFP/SFP+/SFP28/QSFP-DD/OSFP for three temperature electrical performance, optical parameters, and DDM reliability testing during the development stage.
Temperature Forcing Systems TS560 is used for three temperature testing of optical modules. Advantages:
1. Fast temperature change speed: Three temperature points quickly jump, and the testing time for a single set of three temperatures is compressed from hours to minutes, accelerating research and development iterations.
2. Real temperature measurement loop of DUT, avoiding temperature difference between air and module shell, ensuring compliance with three temperature conditions, and meeting the reliability verification requirements of optical communication.
3. No liquid nitrogen consumption, low operating costs; Automatic defrosting function, suppresses the risk of low-temperature condensation, and protects the optical module's optical port and golden fingers.
4. Open communication protocol, can integrate ATE automated testing platform, execute complete three temperature testing scripts with one click, and automatically record the optical/electrical parameters of each temperature point.
5. Mobile body, flexible docking with existing optical module testing bench, no need to modify large laboratories.
With the 1.6T optical module entering the trial production and small-scale mass production stage, the industry's requirements for three temperature testing are no longer "simple overheating", but high-precision, full parameter, automated, and multi station parallel testing. New generation high-speed module testing core requirements: wide temperature range stable coverage: -40 ℃~+85 ℃ precise temperature control, minimal error, matching industrial grade strict standards; Full process monitoring of temperature changes: not only fixed-point testing, but also capturing parameter fluctuations and instantaneous anomalies during the temperature rise and fall process; Adaptive high-speed parameter testing: supports high-precision detection of 800G/1.6T eye diagram, error code, and wavelength drift; Automated mass production solution: adapted to large-scale production lines, replacing manual temperature measurement and insertion, improving efficiency and yield. The quality competition of future optical modules is no longer a competition of parameter limits, but a competition of stability under all temperature conditions.

Some of the content in this article is reproduced from the internet. If there is any infringement, please contact us for deletion. Thank you!